Hope Pick n Mix Headset Cup complete

The Hope  Pick n Mix headset cups allow you to choose the correct top and bottom cups to suit your frame, now available in the full Hope colour range too!

- Headset cups, crown race and hardware all machined in-house in Barnoldswick

- anodised finish

- stainless steel cartridge bearings for longevity

- split crown race design for easy fitting

Headset sizing is something of a minefield, so please contact us if you're not sure which cup(s) you require!

Top cups

1 - EC34/28.6 - External cup, 34mm, 1 1/8"

2 - ZS44/28.6 - Zero stack, 44m, 1 1/8"

3 - IS41/28.6 - Integrated (no cup) 41mm, 1 1/8" (45 degree bearing)

4 - ZS49/28.6 - Zero stack, 49mm, 1 1/8"

5 - ZS56/38.1 - Zero stack, 56mm, 1.5"

6 - EC49/38.1 - External cup, 49mm, 1.5"

7 - IS41/28.6 - Integrated (no cup), 41mm, 1 1/8" (45 degree bearing)

8 - IS42/28.6 - Integrated (no cup), 42mm, 1 1/8" (45 degree bearing)

9 - ZS56/28.6 - Zero stack, 56mm, 1 1/8"

Bottom cups

A - EC34/30 - External cup, 34mm, 1 1/8"

B - ZS44/30 - Zero stack, 44mm, 1 1/8"

C - IS41/30 - Integrated (no cup), 41mm, 1 1/8" (45 degree bearing)

D - ZS49/30 - Zero stack, 49mm, 1 1/8"

E - ZS56/40 - Zero stack, 56mm, 1.5"

F - EC49/40 - External cup, 49mm, 1.5"

G - ZS55/40 - Zero stack, 55mm, 1.5"

H - EC44/40 - External cup, 44mm, 1.5"

J - IS52/40 - Integrated (no cup), 52mm, 1.5", 45 degree bearing

If purchasing a headset with a frame or bike, please pop a note in at checkout if you'd like it fitting at no extra charge.